{
  "action.abort": "Abort",
  "action.createFolder": "Create backup folder",
  "action.listFiles": "List controller files",
  "action.pause": "Pause",
  "action.reset": "Reset",
  "action.runAsyncNamed": "Run {program} in background",
  "action.runNamed": "Run {program}",
  "action.runProgram": "Run program",
  "action.runProgramAsync": "Run program in background",
  "action.selectNamed": "Select {program}",
  "action.selectProgram": "Select program",
  "action.write": "Write {signal}",
  "alarm.aria.active": "Active alarm: {message}. Tap for history.",
  "alarm.aria.none": "No active alarms. Tap for history.",
  "alarm.none": "No active alarms",
  "alarm.severity.alarm": "ALARM",
  "alarm.severity.clear": "CLEAR",
  "alarm.severity.warn": "WARN",
  "alarms.active": "Active",
  "alarms.active.none": "No active alarms.",
  "alarms.close": "Close",
  "alarms.history": "History",
  "alarms.history.none": "No events recorded yet.",
  "alarms.history.older": "Show older",
  "alarms.title": "Alarms",
  "backup.busy.body": "Wait for the current backup to finish before starting another.",
  "backup.busy.title": "Backup already running",
  "backup.cancel": "Stop backup",
  "backup.confirm.body": "Copies programs, registers and system files to the USB drive. This can take several minutes — leave the drive in place until it finishes.",
  "backup.confirm.ok": "Back up",
  "backup.confirm.title": "Back up the controller?",
  "backup.done.body": "Folder: {folder}. Files copied: {copied}.",
  "backup.done.title": "Backup complete",
  "backup.errors.body": "Folder: {folder}. Files copied: {copied}. Files that could not be copied: {failed}.",
  "backup.errors.title": "Backup finished with errors",
  "backup.failed.body": "Could not start the backup. Check that a USB drive is inserted and not write-protected.",
  "backup.failed.title": "Backup failed",
  "backup.line.failure": "{file} — status {status}",
  "backup.line.more": "…and {n} more",
  "backup.progress": "Backing up controller…",
  "backup.progress.file": "Copied {file}",
  "backup.stopped.body": "Stopped before finishing. Folder: {folder}. Files copied: {copied}. Not attempted: {remaining}. Check that the USB drive is inserted and has free space.",
  "backup.stopped.title": "Backup stopped",
  "confirm.body": "Are you sure?",
  "confirm.ok": "Confirm",
  "confirm.title": "Confirm",
  "dropdown.loadingPrograms": "Loading programs…",
  "embed.loading3d": "Loading 3D view…",
  "error.abortFailed": "Could not stop the program.",
  "error.alreadyRunning": "That program is already running.",
  "error.backupFolderFailed": "Could not create the backup folder on the USB stick.",
  "error.badBackupFolder": "That backup folder name cannot be used.",
  "error.badDocId": "That screen file could not be found on the controller.",
  "error.badKarelValue": "That value does not match the variable type.",
  "error.badKarelVar": "That KAREL program or variable name cannot be used.",
  "error.badSysVar": "That system value cannot be written.",
  "error.copyBusy": "A copy is already running. Wait for it to finish.",
  "error.copyFailed": "Could not copy the file.",
  "error.copyResetFailed": "Could not clear the copy status.",
  "error.copyStartFailed": "Could not start the copy.",
  "error.copyStatusFailed": "Could not read the copy status.",
  "error.docListFailed": "Could not list the screen files on the controller.",
  "error.docReadFailed": "Could not read the screen file.",
  "error.estopOp": "Operator-panel E-STOP is pressed. Release it and reset before running.",
  "error.estopTp": "Teach-pendant E-STOP is pressed. Release it and reset before running.",
  "error.faulted": "Controller is faulted. Reset faults before running.",
  "error.fileOpenFailed": "Could not open the file on the controller.",
  "error.generic": "failed",
  "error.karelTextTooLong": "That text is too long to send to the controller.",
  "error.karelTextUnsafe": "That text contains characters the controller cannot accept.",
  "error.karelWriteFailed": "Could not write the KAREL variable. The controller refused it.",
  "error.motionGroup": "That program moves the robot, so it cannot run in the background. Use Run program instead.",
  "error.needsProgramSource": "Program selection needs a program dropdown or a Select program action.",
  "error.noProgramName": "No program name was given.",
  "error.noProgramToRun": "No program name configured — nothing to run.",
  "error.noProgramToSelect": "No program name configured — nothing to select.",
  "error.pauseFailed": "Could not pause the program.",
  "error.programAttrs": "Could not read that program from the controller.",
  "error.programMissing": "Program does not exist on the controller. Check the name or load the program.",
  "error.runFailed": "Could not start the program.",
  "error.tpEnabled": "Teach pendant is enabled. Turn the TP switch off to run from the HMI.",
  "error.unauthorized": "The controller refused the request. Check the license.",
  "error.unknownIoType": "That signal type cannot be written from a screen.",
  "error.usbAbsent": "No USB stick detected. Insert one and try again.",
  "error.usbAccess": "Could not access the USB stick.",
  "error.usbNotReady": "USB stick not ready. Check that it is formatted FAT32.",
  "error.writeFailed": "Could not write the signal. The controller refused it.",
  "keypad.backspace": "Backspace",
  "keypad.cancel": "Cancel",
  "keypad.clear": "Clear",
  "keypad.max": "Max",
  "keypad.min": "Min",
  "keypad.negate": "Negate",
  "keypad.ok": "OK",
  "keypad.title": "Enter value",
  "modal.cancel": "Cancel",
  "modal.ok": "OK",
  "programControl.abort.body": "Stop the running program?",
  "programSelect.run.confirm": "Abort & run",
  "programSelect.run.paused": "{busy} is paused. Running {program} will abort it first.",
  "programSelect.run.running": "{busy} is running. Running {program} will abort it first.",
  "programSelect.run.title": "Abort and run?",
  "programSelect.run.unknown": "{busy} may be running. Running {program} will abort it first.",
  "programSelect.select.confirm": "Abort & select",
  "programSelect.select.paused": "{busy} is paused. Selecting {program} will abort it.",
  "programSelect.select.running": "{busy} is running. Selecting {program} will abort it.",
  "programSelect.select.title": "Abort and select?",
  "programSelect.select.unknown": "{busy} may be running. Selecting {program} will abort it.",
  "programSelect.unnamed": "A program",
  "slider.aria": "Slider",
  "toast.view": "View",
  "unsupported.banner": "Controls on this screen that cannot be shown: {count}. It was made with a newer version of HMI Forge."
}